GNC Servis | DJI Drone and Gimbal Repair in TurkeyDJI
Fault · Warranty-Backed Repair

Gimbal Fault

Fast, cost-effective repair for gimbal shake, calibration errors and physical damage.

Gimbal faults: the number one problem in every series

In our own service records, the gimbal is the number one fault in every device series we work on. The reason is simple: the gimbal is the most delicate mechanical part of a drone — tiny motors running constantly on three axes, thin flex cables and rubber dampers that filter out vibration. This assembly is the weakest link in the body when it comes to impacts, vibration and moisture.

What does each symptom point to?

  • "Gimbal Motor Overloaded" warning at start-up — the mechanism is jammed somewhere. The most common causes are a bent gimbal arm or a dislodged damper.

  • The image is permanently tilted — if calibration doesn't fix it, there's a problem with the roll motor or the IMU.

  • Wobble in the footage during flight (jello) — usually worn dampers or an unbalanced propeller. Each is ruled out separately.

  • The gimbal doesn't move at all — the flex cable may be broken; on foldable models the cable runs through a narrow channel, so that's where it wears most.

  • The gimbal tips to one side on take-off and stays there — a fault in the motor winding or the driver circuit.

Which devices do we see it on most?

The share of gimbal work varies by series. The devices we see most often, in order:

It's no coincidence that the Mini series tops the list: in a body slimmed down to stay under 250 grams, the gimbal is the part that takes the most impact.

What do we do during the repair?

With a gimbal fault, "let's just replace the whole thing" is the most expensive and often unnecessary route. We first measure the mechanism's free range of movement and read the motor currents: is it jammed, has a motor burned out, or is a cable broken? These are three different jobs at three different costs. The damper set, flex cable, a single motor or the PTZ module can each be replaced separately.

Before sending it in

  • Don't try to force the gimbal straight by hand — forcing a jammed mechanism also kills the motor and turns a small repair into a big one.

  • Fit the gimbal protector; carrying the drone without it is the most common cause of damage across the series.

  • If you're seeing shake, keep the last video you recorded — the pattern of the wobble tells us whether it's the dampers or the motor.

Frequently asked questions

Will gimbal calibration fix the problem?

If the drift is software-related, yes — it takes a few minutes. With mechanical damage, though, calibration gives a temporary fix and then the problem comes back. If the problem returns within days of calibrating, the mechanical side needs to be checked.

Does a gimbal fault affect flight safety?

The device still flies with a faulty gimbal, because the gimbal concerns the camera, not the flight. However, a jammed gimbal motor draws current constantly and heats up, and over time it can affect the mainboard too; putting it off makes the repair more expensive.

How do I create a repair request?

Just describe the symptom on your device in a few sentences. You can send your device by courier or drop it off in person; as soon as the request is created, we send you a tracking link and you can follow every step of the repair on the tracking page.

Let's repair your Gimbal Fault today

Create an online repair request and get your device to us by courier or in person. Once we've diagnosed the fault, we start the repair with your approval.